Add hannoprint code

hannoprint/Marlin-2.1.2.1/config/examples/Anet/A6/_Statusscreen.h

@@ -0,0 +1,56 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y           10
+#define STATUS_LOGO_WIDTH       40
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B01110000,B00000000,B00001000,B00000011,B10001110,
+  B10001000,B00000000,B00001000,B00000100,B01010000,
+  B10001010,B11000111,B00111110,B00000100,B01010000,
+  B11111011,B00101000,B10001000,B00000111,B11001110,
+  B10001010,B00101111,B00001000,B00000100,B01010001,
+  B10001010,B00101000,B00001000,B00000100,B01010001,
+  B10001010,B00100111,B00000110,B00000100,B01001110
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_X      48
+#define STATUS_BED_X          74

hannoprint/Marlin-2.1.2.1/config/examples/Anet/A8/_Statusscreen.h

@@ -0,0 +1,56 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y           10
+#define STATUS_LOGO_WIDTH       40
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B01110000,B00000000,B00001000,B00000011,B10001110,
+  B10001000,B00000000,B00001000,B00000100,B01010001,
+  B10001010,B11000111,B00111110,B00000100,B01010001,
+  B11111011,B00101000,B10001000,B00000111,B11001110,
+  B10001010,B00101111,B00001000,B00000100,B01010001,
+  B10001010,B00101000,B00001000,B00000100,B01010001,
+  B10001010,B00100111,B00000110,B00000100,B01001110
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_X      48
+#define STATUS_BED_X          74

hannoprint/Marlin-2.1.2.1/config/examples/Anet/A8plus/_Statusscreen.h

@@ -0,0 +1,66 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            6
+#define STATUS_LOGO_WIDTH       40
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B01110000,B00000000,B00001000,B00000011,B10001110,
+  B10001000,B00000000,B00001000,B00000100,B01010001,
+  B10001010,B11000111,B00111110,B00000100,B01010001,
+  B11111011,B00101000,B10001000,B00000111,B11001110,
+  B10001010,B00101111,B00001000,B00000100,B01010001,
+  B10001010,B00101000,B00001000,B00000100,B01010001,
+  B10001010,B00100111,B00000110,B00000100,B01001110,
+  B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00001110,B01000000,B00000000,B00000000,
+  B00000000,B00010001,B01000000,B00000000,B00000000,
+  B00000000,B00010001,B01010001,B00111000,B00000000,
+  B00000000,B00011110,B01010001,B01000000,B00000000,
+  B00000000,B00010000,B01010001,B00111000,B00000000,
+  B00000000,B00010000,B01010001,B00000100,B00000000,
+  B00000000,B00010000,B01001110,B00111000,B00000000
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_X      48
+#define STATUS_BED_X          74

hannoprint/Marlin-2.1.2.1/config/examples/Anet/A9/_Statusscreen.h

@@ -0,0 +1,56 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y           10
+#define STATUS_LOGO_WIDTH       40
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B01110000,B00000000,B00001000,B00000011,B10001110,
+  B10001000,B00000000,B00001000,B00000100,B01010001,
+  B10001010,B11000111,B00111110,B00000100,B01010001,
+  B11111011,B00101000,B10001000,B00000111,B11001110,
+  B10001010,B00101111,B00001000,B00000100,B01000001,
+  B10001010,B00101000,B00001000,B00000100,B01000001,
+  B10001010,B00100111,B00000110,B00000100,B01011110
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_X      48
+#define STATUS_BED_X          74

hannoprint/Marlin-2.1.2.1/config/examples/Anet/E16/Stock/_Bootscreen.h

@@ -0,0 +1,73 @@
+/**
+ * Made with Marlin Bitmap Converter
+ * https://marlinfw.org/tools/u8glib/converter.html
+ *
+ * This bitmap from the file '3dpc_tech_bootscreen.bmp'
+ */
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,
+  B11111111,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11000000,B00000000,B11111111,
+  B11111110,B00000000,B11111111,B11111110,B00000111,B11111111,B11111111,B00000001,B11111111,B11111111,B11100000,B00000011,B11111111,B11111000,B00000000,B01111111,
+  B11111110,B00000001,B11111111,B11111111,B00000111,B11111111,B11111111,B11000001,B11111111,B11111111,B11111000,B00000111,B11111111,B11111100,B00000000,B01111111,
+  B11111100,B00000011,B11111111,B11111111,B11000111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111100,B00011111,B11111111,B11111110,B00000000,B01111111,
+  B11111100,B00000111,B11111111,B11111111,B11100111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111110,B00011111,B11111111,B11111111,B00000000,B00111111,
+  B11111000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,B00111111,B11111111,B11111111,B00000000,B00111111,
+  B11111000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11111111,B11111111,B00111111,B11111111,B11111111,B10000000,B00011111,
+  B11111000,B00001111,B11111111,B11111111,B11110111,B11111111,B00111111,B11111001,B11111111,B11111111,B11111111,B01111111,B11111011,B11111111,B10000000,B00011111,
+  B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00111111,B11111101,B11111111,B11001111,B11111111,B01111111,B11110001,B11111111,B10000000,B00011111,
+  B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111,
+  B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111,
+  B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111,
+  B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111,
+  B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11000000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11000000,B00001111,B11111000,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11000000,B00000000,B00000000,B01111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000111,
+  B11000000,B00000000,B00000001,B11111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00001111,B11111111,B11000111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00001111,B11111111,B10000111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00001111,B11111111,B00000111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00001111,B11111111,B00000111,B11111111,B00011111,B11111101,B11111111,B11001111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00001111,B11111111,B10000111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00000111,B11111111,B11000111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00000000,B11111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111110,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00000000,B00000000,B01111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111110,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00001111,B11111000,B01111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111100,B01111111,B11110000,B00000000,B00000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11111111,B11100000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00001111,B11111111,B11111111,B11110111,B11111111,B00111111,B11111001,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111,
+  B11100000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11000000,B00000000,B01111111,B11111111,B11111111,B10000000,B00001111,
+  B11110000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11000000,B00000000,B00111111,B11111111,B11111111,B10000000,B00001111,
+  B11110000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11110001,B11111111,B11000000,B00000000,B00111111,B11111111,B11111111,B00000000,B00001111,
+  B11110000,B00000111,B11111111,B11111111,B11000111,B11111111,B11111111,B11100001,B11111111,B11000000,B00000000,B00011111,B11111111,B11111110,B00000000,B00011111,
+  B11111000,B00000011,B11111111,B11111111,B10000111,B11111111,B11111111,B11000001,B11111111,B11000000,B00000000,B00001111,B11111111,B11111100,B00000000,B00011111,
+  B11111000,B00000001,B11111111,B11111111,B00000111,B11111111,B11111111,B10000001,B11111111,B11000000,B00000000,B00000111,B11111111,B11111000,B00000000,B00011111,
+  B11111000,B00000000,B01111111,B11111100,B00000111,B11111111,B11111100,B00000001,B11111111,B11000000,B00000000,B00000001,B11111111,B11100000,B00000000,B00111111,
+  B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,
+  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000000,B00000000,B01111111,
+  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B11000000,B00000000,B11111111,
+  B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B11000000,B00000000,B11111111,
+  B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B01111100,B01111100,B11111100,B00000001,B11111111,
+  B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B11001100,B11100000,B11101100,B00000001,B11111111,
+  B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B11000100,B11000000,B11000100,B00000011,B11111111,
+  B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B01100000,B11111100,B11000000,B11000100,B00000011,B11111111,
+  B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B01100100,B11000000,B11000000,B11000100,B00000111,B11111111,
+  B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100,B11111100,B01111100,B11000100,B00000111,B11111111,
+  B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B01111100,B00111100,B10000100,B00001111,B11111111,
+  B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111
+};

hannoprint/Marlin-2.1.2.1/config/examples/Anet/E16/Stock/_Statusscreen.h

@@ -0,0 +1,83 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y      3
+#define STATUS_LOGO_WIDTH 24
+
+/**
+ * Made with Marlin Bitmap Converter
+ * https://marlinfw.org/tools/u8glib/converter.html
+ *
+ * This bitmap from the file '3dpc_tech_statusscreen.bmp'
+ */
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,
+  B11111111,B00000000,B11111111,
+  B11111100,B00000000,B00111111,
+  B11110000,B00000000,B00001111,
+  B11100000,B00000000,B00000111,
+  B11100000,B00000000,B00000111,
+  B11000000,B00000000,B00000011,
+  B10011101,B11001110,B00110001,
+  B10010101,B10101111,B01101001,
+  B10010101,B10101101,B01101001,
+  B10000101,B10101101,B01100001,
+  B10001101,B10101111,B01100001,
+  B10010101,B10101100,B01100001,
+  B10010101,B10101100,B01101001,
+  B10010101,B10101100,B01101001,
+  B10011101,B11001100,B00110001,
+  B10000000,B00000000,B00000001,
+  B11000000,B00000001,B11111011,
+  B11100000,B00000000,B00000111,
+  B11100000,B00000000,B00000111,
+  B11110000,B00000000,B00001111,
+  B11111100,B00000000,B00111111,
+  B11111110,B01101100,B01111111,
+  B11111111,B11111111,B11111111
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#if HOTENDS < 2
+  #define STATUS_LOGO_X          8
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_LOGO_X          0
+  #define STATUS_HEATERS_X      32
+  #define STATUS_BED_X          80
+#endif

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET4+/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET4-Pro/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET4/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET4X/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET5-Pro/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET5/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.

hannoprint/Marlin-2.1.2.1/config/examples/Anet/ET5X/README.md

@@ -0,0 +1,52 @@
+# Marlin for Anet ET4/ET5 Series
+
+A debugging/programming probe (_e.g._, ST-Link, J-Link, or Black Magic Probe) is required to flash the the [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases) due to incompatibility with the stock bootloader. Once OpenBLT is flashed, Marlin can be updated by SD card just like the original firmware.
+
+## Flashing OpenBLT Bootloader with an ST-Link V2
+
+1. Using three female to female Dupont jumper cables, connect `GND`, `SWDIO`, and `SWCLK` pins from the ST-Link to the Serial Wire Debug (SWD) header on the motherboard. Pay close attention that the cables on SWD header side match the order below using the `U` and `G` letters printed on the motherboard as a reference:
+
+    ```
+      SWD Header on ET Series motherboard
+         ___
+      U | o |  (not connected)
+        |---|
+        | o |  SWDIO
+        |---|
+        | o |  SWCLCK
+        |---|
+      G | o |  GND
+         ---
+    ```
+    Photo reference:
+
+    <img src="https://i.imgur.com/IBqE0i0.jpeg" width="50%">
+
+    _`GND` is connected to `GND` (black wire), `SWDIO` to `SWDIO` (yellow wire), and `SWCLK` to `SWCLK` (green wire). Your ST-Link pinout may differ from the one pictured, so double-check pinout._
+2. Plug in the ST-Link to your computer's USB port & power on your printer.
+3. Download & install [STM32 ST-Link Utility](https://www.st.com/en/development-tools/stsw-link004.html).
+4. Launch STM32 ST-Link Utility & click `Target` then `Connect`.
+5. Back up the original motherboard firmware starting at address `0x08000000` with a size of `0x100000`:
+    <img src="https://i.imgur.com/RGG4B6L.png" width="50%">
+6. Download & extract [OpenBLT bootloader for Anet ET4/ET5 series printers](https://github.com/davidtgbe/openblt/releases).
+7. Click on `Target` then `Program...`
+8. Set the `Start Address` to `0x08000000`.
+9. Under `File Path`, click `Browse` and select `openblt_et4.bin` extracted in Step 6.
+10. Click `Start` to initiate the flashing process.
+11. OpenBLT for Anet ET4/ET5 series printers is now installed on your motherboard.
+
+## Compiling Marlin
+
+1. Overwrite the default Marlin configs with the ones from this folder.
+2. Compile with the `Anet_ET4_OpenBLT` PlatformIO environment.
+
+## Installing Marlin
+
+1. Once Marlin is compiled, copy `Marlin/.pio/build/Anet_ET4_OpenBLT/firmware.srec` to a blank SD card and insert it into your printer.
+2. Power cycle your printer to start the update process.
+
+## Acknowledgements
+- [@davidtgbe](https://github.com/davidtgbe) for porting Marlin to the ET4/ET5 series.
+- [Telegram Anet ET4 spanish group](https://t.me/anetet4esp), especially [@olidnon](https://github.com/olidnon), who lent his motherboard for testing.
+- [@uwe](https://github.com/uwe) and [@mubes](https://github.com/mubes) from Black Magic Probe team, and to [@Ebiroll](https://github.com/Ebiroll) (BMP/ESP32).
+- All contributors and testers.