Add hannoprint code

2023-09-05 21:37:08 +03:00
parent e5f5cc8c4e
commit eb9bdb4b94
3916 changed files with 4079947 additions and 0 deletions
--- a/hannoprint/Marlin-2.1.2.1/config/examples/Creality/Ender-3
+++ b/hannoprint/Marlin-2.1.2.1/config/examples/Creality/Ender-3
@@ -0,0 +1,35 @@
+# Ender 3 S1
+
+# Display firmware, boot image and icons compilations
+
+Currently Creality provides two kinds of screen units:
+
+**Original Ender 3V2 DWIN display**
+![Ender3v2-DWIN](https://user-images.githubusercontent.com/2745567/156829365-a58a3afc-77e3-40b9-9e16-5edfe3073de8.jpg)
+
+**Original Ender 3S1 DACAI display**
+![Ender3S1-DACAI](https://user-images.githubusercontent.com/2745567/156829472-2c38a4ab-bdde-4c21-b78f-a30692c96500.jpg)
+
+For the Ender 3S1 you must to use the `private` display firmware / icon assets, available here: `../config/examples/Creality/Ender-3 V2/LCD Files`
+
+## How to install
+1. Get an SD card of 8GB or less.
+1. Format the SD card MBR, FAT32 and with a 4 KB sector size
+1. Copy the `private` directory in the Root of SD
+1. Turn off your printer
+1. Disconnect and disassembly the screen unit
+1. Install the SD card into the internal slot of the screen unit
+1. Reconnect the screen to the printer
+1. Turn on the printer and wait for the display to complete all tasks, confirming the procedure success, with the progress bar at 100%
+1. Turn off the printer and remove the SD card from the screen unit
+1. Reassembly the screen unit
+1. Turn on the printer and verify that the screen assets were updated
+
+If you want to change only the icons, then you can leave only the **9.ICO** file inside of the DWIN_SET folder.
+If you weren't able to update the display, verify the format of the SD Card (MBR, FAT32 and allocation unit of 4096 bytes) and the CRC of the files.
+
+Be sure to leave **only** the `private` folder at the root of the card.
+
+---
+
+In: https://github.com/mriscoc/Ender3V2S1/blob/Ender3V2S1-Released/display%20assets/readme.md