lapikud/3d_print
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add hannoprint code

Browse Source
This commit is contained in:
m
2023-09-05 21:37:08 +03:00
parent e5f5cc8c4e
commit eb9bdb4b94
3916 changed files with 4079947 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3370
hannoprint/Marlin-2.1.2.1/config/examples/FlyingBear/P902/Configuration.h Normal file
View File

File diff suppressed because it is too large Load Diff

4253
hannoprint/Marlin-2.1.2.1/config/examples/FlyingBear/P902/Configuration_adv.h Normal file
View File

File diff suppressed because it is too large Load Diff

3369
hannoprint/Marlin-2.1.2.1/config/examples/FlyingBear/P905H/Configuration.h Normal file
View File

File diff suppressed because it is too large Load Diff

4256
hannoprint/Marlin-2.1.2.1/config/examples/FlyingBear/P905H/Configuration_adv.h Normal file
View File

File diff suppressed because it is too large Load Diff

14
hannoprint/Marlin-2.1.2.1/config/examples/FlyingBear/P905H/README.md Normal file
View File

@@ -0,0 +1,14 @@
# Flying Bear P905H configuration
This configuration is for a P905H with **a single extruder and inductive Z-sensor**. It's been thoroughly tested, and I've tried to make the printer work smoothly, so this configuration is more focused on print quality than speed.
- Use this firmware as a baseline for other P905 modifications.
- Find other notes in the config files by searching for "P905H".
## Build Instructions
- Get Visual Studio Code and install the "Auto Build Marlin" extension.
- Download the [Marlin source code](https://marlinfw.org/meta/download/).
- Copy the two Configuration files from this folder into the 'Marlin' folder (replacing the existing files).
- Open the 'MarlinFirmware' project folder in Visual Studio Code.
- Click the "Auto Build Marlin" button and then the Upload button.
- Don't forget to reset your EEPROM with `M502` and `M500` after flashing.