Add hannoprint code
This commit is contained in:
m
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,72 @@
|
||||
# Updated Example Configuration for Velleman [K8200](http://www.k8200.eu/)
|
||||
|
||||
I have taken @CONSULiTAS' excellent configuration file, and added support for the
|
||||
following:
|
||||
|
||||
* VM8204 Z Axis and coupler. This was just a stub previously
|
||||
* Full Graphic LCD Controller with SD
|
||||
|
||||
In addition to the existing options
|
||||
* VM8201 LCD Controller
|
||||
|
||||
I believe the configuration should work for all these options, but since I was
|
||||
only able to test with the VM8204 and full graphic LCD, I have created a new
|
||||
configuration. If you don't have an upgraded K8200 or 3drag, you may wish to
|
||||
use the original version.
|
||||
|
||||
# Instructions
|
||||
|
||||
If you have a VM8204 upgraded Z axis and coupler, ensure the following line
|
||||
is uncommented. Otherwise comment it out:
|
||||
|
||||
```
|
||||
#define K8200_K8204
|
||||
```
|
||||
If you have the VM8201 display unit, uncomment the following line
|
||||
```
|
||||
//#define K8200_VM8201
|
||||
```
|
||||
|
||||
If you have the *3D Printer Full Graphic Smart Controller with 3Drag adapter* (or other screen based on the [RepRap Discount Full Graphic Smart Controller](https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller)), ensure
|
||||
the following is uncommented, otherwise comment it out
|
||||
```
|
||||
#define FULLGRAPHIC_CONTROLLER_LCD_SD
|
||||
```
|
||||
|
||||
## Notes
|
||||
|
||||
I (pau1ie) tested this configuration on my K8200 with VM8204 Z axis and
|
||||
full graphic controller. I purchased a 3drag controller main board which is
|
||||
identical to the Velleman supplied one, so I am confident this firmware
|
||||
will also work with the 3drag as CONSULiTAS states below.
|
||||
|
||||
Only one LCD screen is supported (they plug into the same place), so only one of them should be uncommented.
|
||||
Leaving both controllers uncommented is likely to result in firmware that doesn't work with either.
|
||||
|
||||
There is a configuration option for the K8203 Direct Drive Extruder, but
|
||||
it does nothing at present.
|
||||
|
||||
In addition to the firmware sources below, see the following for for genuine [3drag Firmware](https://3dprint.elettronicain.it/blog/2012/09/06/software/)
|
||||
|
||||
|
||||
# Original Readme
|
||||
|
||||
* Configuration files for **Vellemann K8200** (with [VM8201](http://www.vellemanprojects.eu/products/view/?id=416158) - LCD Option for K8200)
|
||||
* K8200 is a 3Drag clone - configuration should work with 3Drag https://reprap.org/wiki/3drag, too. Please report.
|
||||
|
||||
* updated manually with parameters from genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch
|
||||
|
||||
* VM8201 uses "DISPLAY_CHARSET_HD44870 JAPANESE" and "ULTIMAKERCONTROLLER"
|
||||
* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
|
||||
|
||||
I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well.
|
||||
|
||||
**Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)**
|
||||
* V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip)
|
||||
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_v2.1.1.zip
|
||||
|
||||
* V2 (with LCD/SD-Support, date branched: 2013-06-05): [firmware_k8200_marlinv2.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv2.zip)
|
||||
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv2.zip
|
||||
|
||||
* V1 (without LCD/SD-Support, date branched: 2012-10-02): [firmware_k8200_marlinv1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv1.zip)
|
||||
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv1.zip
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,20 @@
|
||||
# Example Configuration for Vellemann [K8200](http://www.k8200.eu/)
|
||||
* Configuration files for **Vellemann K8200** (with [VM8201](http://www.vellemanprojects.eu/products/view/?id=416158) - LCD Option for K8200)
|
||||
* K8200 is a 3Drag clone - configuration should work with 3Drag https://reprap.org/wiki/3drag, too. Please report.
|
||||
|
||||
* updated manually with parameters from genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch
|
||||
|
||||
* VM8201 uses "DISPLAY_CHARSET_HD44870 JAPANESE" and "ULTIMAKERCONTROLLER"
|
||||
* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
|
||||
|
||||
I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well.
|
||||
|
||||
**Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)**
|
||||
* V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip)
|
||||
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_v2.1.1.zip
|
||||
|
||||
* V2 (with LCD/SD-Support, date branched: 2013-06-05): [firmware_k8200_marlinv2.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv2.zip)
|
||||
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv2.zip
|
||||
|
||||
* V1 (without LCD/SD-Support, date branched: 2012-10-02): [firmware_k8200_marlinv1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv1.zip)
|
||||
* see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv1.zip
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,15 @@
|
||||
# Configuration for Velleman K8400 Vertex
|
||||
http://www.k8400.eu/
|
||||
|
||||
Configuration files for the K8400, ported upstream from the official Velleman firmware.
|
||||
Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.
|
||||
|
||||
Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory.
|
||||
|
||||
**NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!**
|
||||
|
||||
For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware
|
||||
|
||||
### Original Sources
|
||||
Credit to Velleman for the original 1.0.x based code:<br />
|
||||
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,15 @@
|
||||
# Configuration for Velleman K8400 Vertex
|
||||
http://www.k8400.eu/
|
||||
|
||||
Configuration files for the K8400, ported upstream from the official Velleman firmware.
|
||||
Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.
|
||||
|
||||
Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory.
|
||||
|
||||
**NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!**
|
||||
|
||||
For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware
|
||||
|
||||
### Original Sources
|
||||
Credit to Velleman for the original 1.0.x based code:<br />
|
||||
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip
|
||||
Reference in New Issue
Block a user