lapikud
/
3d_print
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3D printerite konfiguratsioonid
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2 Commits
1 Branch
0 Tags
28 MiB
 
 
 
Tag: Branch: Tree: master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'master'
${ noResults }
3d_print/hannoprint/Marlin-2.1.2.1/config/examples/Two Trees/Sapphire Plus
m eb9bdb4b94
Add hannoprint code 		2 years ago
..
Sapphire Plus V2 Add hannoprint code 2 years ago
Sapphire Plus V2.1 Add hannoprint code 2 years ago
README.md Add hannoprint code 2 years ago

README.md

Two Trees Sapphire Configurations

This folder contains two default configurations for the Two Trees Sapphire Plus V2. The V2 has Dual Z Axis limit switches, and the V2.1 has a single Z limit switch, as well as a different board.

Supported Versions

Version Board Z-axis switches
V2 MKS Robin Nano V1.2 2
V2.1 MKS Robin Nano V1.3 1

Make sure you always test the endstops/limit switches after using this configuration, as newer printers may have slight electrical and mechanical differences.

Configuration differences on V2.1

  • Build with BOARD_MKS_ROBIN_NANO_V1_3_F4;
  • Disable ZMAX plug (Z increments lower the bed);
  • Enable INVERT_Z_DIR (Z increments lower the bed);
  • Disable PRINTCOUNTER (not supported with current settings);
  • Rotate TFT 180º;
  • Enable endstops always on;
  • Disable multiple Z endstops;

Available options

By default the standard Marlin Touch UI will be used. Enable the SAPPHIRE_PLUS_MKS_UI option for the MKS UI.

Enable the SAPPHIRE_PLUS_BLTOUCH option for BLTouch support.

Enable the SAPPHIRE_PLUS_TMC_UART option for TMC UART support for the X, Y and E steppers. Note: you will need some hardware modification skills to modify the stepper sticks. A solder pad needs to be bridged to connect PDN to USART pin. Then a 1K resistor and wire is needed to connect the USART pin to the appropriate spare pin on MKS Robin Nano V1.2 board.