Add hannoprint code
This commit is contained in:
m
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,89 @@
|
||||
## CR-10 Mini with BLTouch
|
||||
|
||||
Configuration for the BigTreeTech SKR E3 Mini V2 in a Creality CR-10 Mini using the stock CR-10 display, and a BL Touch v3.1 ABL probe mounted on a Bullseye fan duct. Additional features are enabled to take advantage of the capabilities of the BTT SKR E3 Mini V2 board, detailed below.
|
||||
|
||||
Compile this in the `STM32F103RC_btt_512K` environment. The test board had 512K of Flash and this configuration uses a little over half of that. If your board has only 256K, you will have to disable some features to make the firmware fit.
|
||||
|
||||
### Configuration.h notes:
|
||||
|
||||
```cpp
|
||||
#define USE_PROBE_FOR_Z_HOMING
|
||||
```
|
||||
This configuration uses only the probe for Z homing. The Z-stop switch is NOT enabled and can be disconnected.
|
||||
|
||||
```cpp
|
||||
#define Z_MIN_PROBE_PIN PC14
|
||||
```
|
||||
Plug the BLTouch Black/White connector into the top two pins of the 5-pin Z-PROBE port with the white whire "up". Do not plug the connector in to the Z-MIN port where the limit switch was plugged in.
|
||||
|
||||
```cpp
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 }
|
||||
```
|
||||
These are the offsets for a left-side mounted BL Touch on a Bullseye fan duct base. Change them as required for your particular BL Touch mount.
|
||||
|
||||
```cpp
|
||||
#define MULTIPLE_PROBING 2
|
||||
```
|
||||
Bed probing will test each point twice. 1st probe will be "fast" Z, 2nd will use the slower Z rate.
|
||||
|
||||
```cpp
|
||||
#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
```
|
||||
M48 Enabled to establish probe deviation value.
|
||||
|
||||
```cpp
|
||||
#define AUTO_BED_LEVELING_BILINEAR
|
||||
```
|
||||
Change this as desired. BILINEAR will work for most printers.
|
||||
|
||||
```cpp
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
```
|
||||
This is disabled to work around an issue where —even with an `M420` command in start G-Code— ABL would toggle to the opposite of whatever the ABL state was (Enabled/Disabled) at the time a print job started.
|
||||
|
||||
```cpp
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
```
|
||||
This configuration is set to use a 5x5 (25 point) probing grid. Change as desired.
|
||||
|
||||
```cpp
|
||||
#define EXTRAPOLATE_BEYOND_GRID
|
||||
```
|
||||
By default, this is disabled. Enabling this seemed to provide better mesh data.
|
||||
|
||||
```cpp
|
||||
#define LCD_BED_LEVELING
|
||||
```
|
||||
Provides control panel probe controls.
|
||||
|
||||
```cpp
|
||||
#define LCD_BED_TRAMMING
|
||||
```
|
||||
Provides control panel bed tramming controls.
|
||||
|
||||
```cpp
|
||||
#define Z_SAFE_HOMING
|
||||
```
|
||||
Ensures the BL Touch probe is not hanging off the edge of the bed when Z homing.
|
||||
|
||||
```cpp
|
||||
#define CR10_STOCKDISPLAY
|
||||
```
|
||||
If you are using the stock display on your CR-10 Mini, this **MUST** be enabled.
|
||||
|
||||
### Configuration_adv.h notes:
|
||||
|
||||
```cpp
|
||||
#define LIN_ADVANCE
|
||||
```
|
||||
This is enabled, but the K value is set to 0 which effectively disables LIN_ADVANCE. Calibrate Linear Advance and set your own K value and recompile.
|
||||
|
||||
```cpp
|
||||
#define ARC_SUPPORT
|
||||
```
|
||||
Enables G2/G3 moves to smooth curves in your prints. Required for the Arc Welder plugin for OctoPrint etc.
|
||||
|
||||
```cpp
|
||||
#define ARC_P_CIRCLES
|
||||
```
|
||||
Normally disabled by default.
|
||||
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000111,B11001111,B10000000,B00110001,B11100000,
|
||||
B00001111,B11001111,B11000000,B01110011,B11110000,
|
||||
B00001100,B00001100,B01000000,B01110011,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,
|
||||
B00001100,B00001111,B11001111,B00110011,B00110000,
|
||||
B00001100,B00001101,B10001111,B00110011,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,
|
||||
B00001111,B11001100,B11000000,B00110011,B11110000,
|
||||
B00000111,B11001100,B11000000,B00110001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000001,B10000011,B00110000,B00000011,B00000000,
|
||||
B00000001,B10000011,B00110010,B00000011,B00000000,
|
||||
B00000001,B11000111,B00000010,B11100000,B00000000,
|
||||
B00000001,B11000111,B00110011,B11110011,B00000000,
|
||||
B00000001,B11101111,B00110011,B00110011,B00000000,
|
||||
B00000001,B10111011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10000011,B00110011,B00110011,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000111,B11001111,B10000000,B00110001,B11100000,
|
||||
B00001111,B11001111,B11000000,B01110011,B11110000,
|
||||
B00001100,B00001100,B01000000,B01110011,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,
|
||||
B00001100,B00001111,B11001111,B00110011,B00110000,
|
||||
B00001100,B00001101,B10001111,B00110011,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,
|
||||
B00001111,B11001100,B11000000,B00110011,B11110000,
|
||||
B00000111,B11001100,B11000000,B00110001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000001,B10000011,B00110000,B00000011,B00000000,
|
||||
B00000001,B10000011,B00110010,B00000011,B00000000,
|
||||
B00000001,B11000111,B00000010,B11100000,B00000000,
|
||||
B00000001,B11000111,B00110011,B11110011,B00000000,
|
||||
B00000001,B11101111,B00110011,B00110011,B00000000,
|
||||
B00000001,B10111011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10000011,B00110011,B00110011,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,102 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00011111,B11111110,B00001111,B11111111,B10000000,B01111111,B11111111,B11110000,B00111111,B11111111,B11111001,B11111111,B11111111,B11100000,
|
||||
B00011111,B11111111,B00001111,B11111111,B10000000,B11111111,B11111111,B11111000,B01111111,B11111111,B11111001,B11111111,B11111111,B11110000,
|
||||
B00011111,B11111111,B00001111,B11111111,B10000001,B11111111,B11111111,B11111000,B11111111,B11111111,B11111001,B11111111,B11111111,B11111000,
|
||||
B00111111,B11111111,B00001111,B11111111,B10000011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111001,B11111111,B11111111,B11111100,
|
||||
B00111111,B11111111,B00011111,B11111111,B10000011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,
|
||||
B00111111,B11111111,B00011111,B11111111,B10000011,B11111111,B11111111,B11111011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,
|
||||
B00111111,B11111111,B00011111,B11111111,B10000011,B11111111,B11111111,B11111011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,
|
||||
B00111111,B11111111,B00011111,B11111111,B11000011,B11111111,B11111111,B11110011,B11111111,B11111111,B11111001,B11111111,B00000011,B11111110,
|
||||
B00111111,B11111111,B10011111,B11111111,B11000011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000011,B11111110,
|
||||
B00111111,B11111111,B10011111,B11111111,B11000011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000011,B11111110,
|
||||
B00111111,B11111111,B10011111,B11111111,B11000011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000011,B11111110,
|
||||
B00111111,B11111111,B10111111,B11111111,B11000011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B11111111,B11111110,
|
||||
B00111111,B11111111,B10111111,B11111111,B11000011,B11111111,B11111111,B11000011,B11111111,B11111111,B11100001,B11111111,B11111111,B11111100,
|
||||
B01111111,B11111111,B10111111,B11111111,B11000011,B11111111,B11111111,B11100011,B11111111,B11111111,B11100001,B11111111,B11111111,B11111100,
|
||||
B01111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11100011,B11111111,B11111111,B11100001,B11111111,B11111111,B11111000,
|
||||
B01111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11100011,B11111111,B11111111,B11100001,B11111111,B11111111,B11110000,
|
||||
B01111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11100011,B11111111,B11111111,B11100001,B11111111,B11111111,B11111100,
|
||||
B01111111,B11111111,B11111111,B11111111,B11100011,B11111111,B11111111,B11100011,B11111111,B11111111,B11100001,B11111111,B11111111,B11111110,
|
||||
B01111111,B11011111,B11111111,B11111111,B11100011,B11111111,B11111111,B11100011,B11111111,B11111111,B11100001,B11111111,B11111111,B11111110,
|
||||
B01111111,B11011111,B11111111,B10111111,B11100011,B11111111,B11111111,B11000011,B11111111,B11111111,B11100001,B11111111,B00000001,B11111111,
|
||||
B01111111,B11011111,B11111111,B10111111,B11100011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000001,B11111111,
|
||||
B01111111,B11011111,B11111111,B00111111,B11100011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000001,B11111111,
|
||||
B11111111,B11011111,B11111111,B00111111,B11100011,B11111110,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000001,B11111111,
|
||||
B11111111,B10011111,B11111111,B00111111,B11100011,B11111111,B00000000,B00000011,B11111111,B00000000,B00000001,B11111111,B00000001,B11111111,
|
||||
B11111111,B10011111,B11111111,B00111111,B11100011,B11111111,B11111111,B11111011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B10001111,B11111111,B00111111,B11100011,B11111111,B11111111,B11111011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B10001111,B11111111,B00111111,B11110011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,
|
||||
B11111111,B10001111,B11111111,B00011111,B11110011,B11111111,B11111111,B11111001,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,
|
||||
B11111111,B10001111,B11111110,B00011111,B11110001,B11111111,B11111111,B11111001,B11111111,B11111111,B11111001,B11111111,B11111111,B11111100,
|
||||
B11111111,B10001111,B11111110,B00011111,B11110001,B11111111,B11111111,B11111000,B11111111,B11111111,B11111001,B11111111,B11111111,B11111000,
|
||||
B11111111,B10001111,B11111110,B00011111,B11110000,B11111111,B11111111,B11111000,B01111111,B11111111,B11111001,B11111111,B11111111,B11110000,
|
||||
B11111111,B00000111,B11111110,B00011111,B11110000,B00111111,B11111111,B11100000,B00011111,B11111111,B11110001,B11111111,B11111111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000011,B11111111,B11111011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00111111,B11111111,B11111111,B11111111,B11100000,
|
||||
B00000000,B00000000,B11111111,B11111111,B11111111,B00000000,B11111011,B11111111,B11111111,B10000000,B00011111,B01111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000111,B11111111,B11111111,B00000000,B00000011,B11111111,B11111111,B11000000,B00000000,B01111111,B11111111,B11111000,
|
||||
B00000000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000011,B11111111,B11111111,B11100000,B00000000,B01111111,B11111111,B11111000,
|
||||
B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111000,
|
||||
B00000000,B00000000,B11111111,B11111111,B11111111,B00000000,B11111111,B11111111,B11111111,B11110000,B00011111,B11111111,B11111111,B11111100,
|
||||
B00000000,B00000000,B00000000,B00000000,B11111111,B00000000,B00000111,B11111111,B11111111,B11110000,B00000000,B11111111,B11111111,B11111100,
|
||||
B00000000,B00000000,B00000000,B00000000,B11111111,B00000000,B00000111,B11111000,B00011111,B11110000,B00000000,B11111111,B00001111,B11111000,
|
||||
B00000000,B01111111,B11111111,B00000001,B11111111,B11111111,B11110111,B11111000,B00011111,B11111111,B11111110,B11111111,B00001111,B11111000,
|
||||
B00000000,B00000000,B00011111,B00111111,B11111110,B00000001,B11110111,B11111000,B00011111,B11110000,B00111110,B11111111,B00001111,B11111000,
|
||||
B00000000,B00000000,B00000000,B11111111,B11111100,B00000000,B00001111,B11111000,B00011111,B11110000,B00000001,B11111111,B00001111,B11111000,
|
||||
B00000000,B00000000,B00000000,B11111111,B11111000,B00000000,B00001111,B11111000,B00011111,B11110000,B00000001,B11111111,B00001111,B11111000,
|
||||
B00000000,B01111111,B11111110,B11111111,B11111111,B11111111,B11101111,B11111000,B00111111,B11111111,B11111101,B11111111,B00011111,B11110000,
|
||||
B00000000,B00000000,B00111110,B11111111,B11111100,B00000011,B11101111,B11110000,B00111111,B11100000,B01111101,B11111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00001111,B11110000,B00111111,B11100000,B00000001,B11111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00001111,B11110000,B00111111,B11100000,B00000001,B11111111,B11111111,B11100000,
|
||||
B00000000,B11111111,B11111110,B00011111,B11111111,B11111111,B11111111,B11110000,B00111111,B11111111,B11111111,B11111111,B11111111,B11000000,
|
||||
B00000000,B00000000,B01111100,B00000011,B11111110,B00000011,B11011111,B11110000,B01111111,B11000000,B01111011,B11111111,B11111111,B10000000,
|
||||
B00000000,B00000000,B00010000,B00000011,B11111110,B00000000,B00011111,B11110000,B01111111,B11000000,B00000011,B11111111,B11111111,B00000000,
|
||||
B00000000,B00000000,B00011111,B11111111,B11111110,B00000000,B00011111,B11111111,B11111111,B11000000,B00000011,B11111111,B11111100,B00000000,
|
||||
B00011111,B11111111,B10111111,B11111111,B11111111,B11111111,B11011111,B11111111,B11111111,B11111111,B11111011,B11111100,B00000000,B00000000,
|
||||
B00000000,B00001111,B10111111,B11111111,B11111100,B00000111,B11111111,B11111111,B11111111,B00000000,B11111011,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00111111,B11111111,B11111000,B00000000,B00111111,B11111111,B11111110,B00000000,B00000111,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B01111111,B11111111,B11111000,B00000000,B00111111,B11111111,B11111110,B00000000,B00000111,B11111100,B00000000,B00000000,
|
||||
B01111111,B11111111,B01111111,B11111111,B11111111,B11111111,B10111111,B11111111,B11111111,B11111111,B11110111,B11111100,B00000000,B00000000,
|
||||
B00000000,B00111111,B01111111,B11111111,B10000000,B00001111,B10111111,B11111111,B11000000,B00000001,B11110111,B11111000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,71 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define STATUS_LOGO_X 0
|
||||
#define STATUS_LOGO_Y 0
|
||||
#define STATUS_LOGO_WIDTH 39
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11000000,B00110011,B11111011,B11111101,B11111100,
|
||||
B11100000,B01110111,B11111011,B11111101,B11111110,
|
||||
B11100000,B01110110,B00000011,B00000001,B10000110,
|
||||
B11110000,B11110110,B00000011,B00000001,B10000110,
|
||||
B11110000,B11110110,B00000011,B00000001,B10000110,
|
||||
B11010000,B10110110,B00000011,B00000001,B10000110,
|
||||
B11011001,B10110111,B11111011,B11111001,B11111110,
|
||||
B11011001,B10110110,B00000011,B00000001,B10000110,
|
||||
B11001111,B00110110,B00000011,B00000001,B10000110,
|
||||
B11001111,B00110110,B00000011,B00000001,B10000110,
|
||||
B11001111,B00110110,B00000011,B00000001,B10000110,
|
||||
B11000110,B00110111,B11111011,B11111101,B11111110,
|
||||
B11000000,B00110011,B11111001,B11111101,B11111100,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00001111,B11100001,B11111110,B00001111,B11110000,
|
||||
B00011111,B11110001,B11111111,B00001111,B11111000,
|
||||
B00011000,B00110001,B10000001,B10001100,B00011000,
|
||||
B00000000,B00110001,B10000001,B10001100,B00011000,
|
||||
B00000000,B00110001,B10000001,B10001100,B00011000,
|
||||
B00000111,B11100001,B10000001,B10001100,B00011000,
|
||||
B00000111,B11100001,B10000001,B10001111,B11111000,
|
||||
B00000000,B00110001,B10000001,B10001111,B11110000,
|
||||
B00000000,B00110001,B10000001,B10001100,B00000000,
|
||||
B00000000,B00110001,B10000001,B10001100,B00000000,
|
||||
B00011000,B00110001,B10000001,B10001100,B00000000,
|
||||
B00011111,B11110001,B11111111,B00001100,B00000000,
|
||||
B00001111,B11100001,B11111110,B00001100,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,15 @@
|
||||
# CR-10 S5 with BTT SKR E3 mini v3.0:
|
||||
|
||||
- BLtouch v3.1 (conneted to the Z endstop pin)
|
||||
- Stock LCD (connected to the LCD's EXT3 spare port, with one single straight ribbon cable)
|
||||
- Bondtech or stock extruder
|
||||
- Bowden setup
|
||||
- All 4 fans are PWM controlled.
|
||||
|
||||
## Flashing Mainboard Firmware
|
||||
|
||||
The bootloader which handles flashing new firmware on this board remembers the last filename you used.
|
||||
|
||||
### Where to put the firmware file on the SDCard:
|
||||
|
||||
Put the `firmware.bin` file into the root folder.
|
||||
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,68 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 3
|
||||
#define STATUS_LOGO_WIDTH 40
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000000,B11111011,B11110000,B00000000,B00000000,
|
||||
B00000001,B11011001,B10111000,B11100011,B10000000,
|
||||
B00000011,B10001001,B10111001,B11100111,B11000000,
|
||||
B00000011,B10000001,B11110000,B11000110,B11000000,
|
||||
B00000011,B11000001,B10111000,B11000110,B11000000,
|
||||
B00000001,B11111011,B10111000,B11100111,B11000000,
|
||||
B00000000,B11111011,B11011111,B11110011,B10000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000011,B11001110,B00000000,B00000000,
|
||||
B00000000,B00000001,B11001000,B11110000,B00000000,
|
||||
B00000000,B00000001,B11011001,B11110000,B00000000,
|
||||
B00000000,B00000000,B11110000,B01110000,B00000000,
|
||||
B00000000,B00000000,B11110000,B01100000,B00000000,
|
||||
B00000000,B00000000,B01100000,B11111000,B00000000,
|
||||
B00000000,B00000000,B01100001,B11111000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,69 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00011100,B11110000,B00010001,B11000000,
|
||||
B00100010,B10001000,B00110010,B00100000,
|
||||
B00100000,B10001000,B00010010,B00100000,
|
||||
B00100000,B11110011,B10010010,B00100000,
|
||||
B00100000,B10100000,B00010010,B00100000,
|
||||
B00100010,B10010000,B00010010,B00100000,
|
||||
B00011100,B10001000,B00111001,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B01000101,B11110000,B00000000,
|
||||
B00000000,B01000100,B00100000,B00000000,
|
||||
B00000000,B01000100,B01000000,B00000000,
|
||||
B00000000,B01000100,B00100000,B00000000,
|
||||
B00000000,B01000100,B00010000,B00000000,
|
||||
B00000000,B00101001,B00010000,B00000000,
|
||||
B00000000,B00010000,B11100000,B00000000,
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,5 @@
|
||||
# Configuration Notes
|
||||
|
||||
This configuration is for the Creality CR-10S with a BigTreeTech SKR 2.0 board, TMC2209 stepper drivers, CR-Touch probe, and the Microswiss All-Metal Hotend.
|
||||
|
||||
Edit and tune this configuration if you have the stock hotend, no probe, a different probe, etc.
|
||||
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,6 @@
|
||||
## CR-10S with SKR Pro V1.2
|
||||
|
||||
With support for:
|
||||
- TMC2209 Stepper Drivers
|
||||
- BLTouch Probe
|
||||
- Advanced Pause (`M600`) and Nozzle Park (`G27`) with Filament Change
|
||||
@@ -0,0 +1,78 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000001,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B00000000,B00000000,
|
||||
B00000000,B00000000,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B11000000,B00000000,
|
||||
B00000000,B00000011,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B11110000,B00000000,
|
||||
B00000000,B00001111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11111100,B00000000,
|
||||
B00000000,B00011111,B11111111,B11111111,B11111001,B11111111,B11111111,B11111111,B11111000,B00001111,B11111111,B11111111,B11111110,B00000000,
|
||||
B00000000,B00111111,B11111111,B11111111,B11111101,B11111111,B11111111,B11111111,B11111110,B00011111,B11111111,B11111111,B11111111,B00000000,
|
||||
B00000000,B01111111,B11111000,B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B00011111,B11111110,B00000111,B11111111,B10000000,
|
||||
B00000000,B01111111,B11100000,B00000011,B11111110,B11111111,B11111111,B11111111,B11111111,B00111111,B11110000,B00000001,B11111111,B10000000,
|
||||
B00000000,B11111111,B10000000,B00000000,B11111110,B01111111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B01111111,B11000000,
|
||||
B00000001,B11111111,B00000000,B00000000,B01111110,B00111111,B11111111,B11111111,B11111111,B00111111,B10000000,B00000000,B00111111,B11100000,
|
||||
B00000001,B11111110,B00000000,B00000000,B00111110,B00111111,B11111111,B11111111,B11111111,B00111111,B00000000,B00000000,B00011111,B11100000,
|
||||
B00000011,B11111100,B00000000,B00000000,B00011111,B11000000,B00000000,B00000000,B01111110,B00111110,B00000000,B00000000,B00001111,B11110000,
|
||||
B00000011,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00111110,B00111100,B00000000,B00000000,B00000111,B11110000,
|
||||
B00000011,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00111110,B00111100,B00000000,B00000000,B00000111,B11110000,
|
||||
B00000111,B11110000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00111100,B00111000,B00000000,B00000000,B00000011,B11111000,
|
||||
B00000111,B11110000,B00000000,B00000000,B00000111,B11110000,B00000000,B00000000,B01111100,B00111000,B00000000,B00000000,B00000011,B11111000,
|
||||
B00000111,B11110000,B00000000,B00000000,B00000111,B11110111,B11111111,B11111111,B11111100,B00111000,B00000000,B00000000,B00000011,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11110011,B11111111,B11111111,B11111100,B00111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11110001,B11111111,B11111111,B11111100,B01111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11110000,B11111111,B11111111,B11111100,B01111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11110000,B11111111,B11111111,B11111100,B01111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11110000,B01111111,B11111111,B11111100,B00111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11110000,B00111111,B11111111,B11111100,B00111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B01111100,B00111000,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00111110,B00111100,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00111110,B00111100,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00011111,B11000000,B00000000,B00000000,B00111110,B00111110,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B00111111,B11000000,B00000000,B00000000,B01111111,B00111111,B00000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B01111110,B00111111,B11111111,B11111111,B11111111,B00111111,B10000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000000,B11111110,B01111111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00000011,B11111110,B01111111,B11111111,B11111111,B11111111,B10111111,B11110000,B00000000,B00000001,B11111000,
|
||||
B00000111,B11100000,B00000000,B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B10111111,B11111100,B00000000,B00000001,B11111000,
|
||||
B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00011111,B11111111,B11111111,B11111111,B11111000,
|
||||
B00000111,B11111111,B11111111,B11111111,B11111101,B11111111,B11111111,B11111111,B11111110,B00001111,B11111111,B11111111,B11111111,B11111000,
|
||||
B00000111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111000,B00000011,B11111111,B11111111,B11111111,B11111000,
|
||||
B00000111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B11111111,B11111000,
|
||||
B00000111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,
|
||||
B00000111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111000,
|
||||
B00000111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B11111000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,56 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
|
||||
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
|
||||
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
|
||||
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
|
||||
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
|
||||
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
|
||||
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
|
||||
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
|
||||
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
|
||||
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
@@ -0,0 +1,74 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,72 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00001111,B01111100,B00111000,B01110000,
|
||||
B00010001,B00100010,B01000100,B10001000,
|
||||
B00100000,B00100010,B01000100,B10001000,
|
||||
B00100000,B00111100,B00000100,B10001000,
|
||||
B00100000,B00101000,B00001000,B10001000,
|
||||
B00100000,B00100100,B00010000,B10001000,
|
||||
B00100000,B00100100,B00100000,B10001000,
|
||||
B00010001,B00100010,B01000000,B10001000,
|
||||
B00001110,B01110011,B01111100,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,
|
||||
B00000111,B11000000,B00000000,B00000000,
|
||||
B00000010,B00100000,B00000000,B00000000,
|
||||
B00000010,B00100000,B00000000,B00000000,
|
||||
B00000010,B00100110,B11000111,B00000000,
|
||||
B00000011,B11000011,B00001000,B10000000,
|
||||
B00000010,B00000010,B00001000,B10000000,
|
||||
B00000010,B00000010,B00001000,B10000000,
|
||||
B00000010,B00000010,B00001000,B10000000,
|
||||
B00000111,B00000111,B10000111,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,750 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Animated boot screen example
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_BOTTOM_JUSTIFY
|
||||
#define CUSTOM_BOOTSCREEN_ANIMATED
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111100,B00111111,B10000111,B11111100,B11111111,B10011011,B00000011,B11111111,B11001110,B01110011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111110,B00111111,B11000111,B11111110,B11111111,B11011011,B10000011,B11111111,B11011111,B11111011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000111,B00110001,B11100110,B00000110,B11000000,B11011011,B11000011,B00001100,B00011111,B11111011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000011,B10110000,B01110110,B01111110,B11001111,B11011011,B11100011,B00001100,B00011101,B10111011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111111,B10110000,B00110110,B11111100,B11011111,B10011011,B01110011,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111111,B10110000,B00110110,B00000000,B11011100,B00011011,B00111011,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000011,B10110000,B01110110,B00000000,B11001110,B00011011,B00011111,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000111,B00110001,B11100110,B00000000,B11000111,B00011011,B00001111,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111110,B00111111,B11000110,B00000000,B11000011,B10011011,B00000111,B00001100,B00011001,B10011011,B01111111,B01111111,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111100,B00111111,B10000110,B00000000,B11000001,B11011011,B00000011,B00001100,B00011001,B10011011,B01111111,B01111111,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00011111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B11111000,
|
||||
B00011111,B10000011,B11110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B11000001,B11111000,
|
||||
B00111001,B11000111,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B11100011,B10011100,
|
||||
B00111000,B11000110,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011100,B01100011,B00011100,
|
||||
B00110000,B00111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011100,B00001100,
|
||||
B00111000,B11000110,B00111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B01100011,B00011100,
|
||||
B00111001,B11000111,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B11100011,B10011100,
|
||||
B00011111,B10000011,B11110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001111,B11000001,B11111000,
|
||||
B00011111,B00000001,B11110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001111,B10000000,B11111000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
#if DISABLED(CUSTOM_BOOTSCREEN_ANIMATED)
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_FRAME_TIME 500 // (ms)
|
||||
|
||||
#else
|
||||
|
||||
const unsigned char custom_start_bmp1[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00011111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B11111000,
|
||||
B00011111,B10000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000001,B11111000,
|
||||
B00111001,B11000111,B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100,B11100011,B10011100,
|
||||
B00111000,B11000110,B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100,B01100011,B00011100,
|
||||
B00110000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00011100,B00001100,
|
||||
B00111000,B11000110,B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100,B01100011,B00011100,
|
||||
B00111001,B11000111,B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100,B11100011,B10011100,
|
||||
B00011111,B10000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000001,B11111000,
|
||||
B00011111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B11111000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp2[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00011111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B11111000,
|
||||
B00011111,B10000011,B11110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B11000001,B11111000,
|
||||
B00111001,B11000111,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B11100011,B10011100,
|
||||
B00111000,B11000110,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011100,B01100011,B00011100,
|
||||
B00110000,B00111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011100,B00001100,
|
||||
B00111000,B11000110,B00111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B01100011,B00011100,
|
||||
B00111001,B11000111,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B11100011,B10011100,
|
||||
B00011111,B10000011,B11110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001111,B11000001,B11111000,
|
||||
B00011111,B00000001,B11110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001111,B10000000,B11111000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp3[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10010000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00011000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111110,B00011100,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000001,B11110000,
|
||||
B00011100,B00000111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000011,B10111000,
|
||||
B00011110,B00000110,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B00000011,B00111000,
|
||||
B00111111,B00001100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011111,B10000110,B00011100,
|
||||
B00111011,B10001000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011101,B11000100,B00011100,
|
||||
B00110000,B11111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B01111100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111110,B00011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011111,B00001100,
|
||||
B00111000,B00100011,B10111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00010001,B11011100,
|
||||
B00111000,B01100001,B11111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00110000,B11111100,
|
||||
B00011100,B11000000,B11110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B01100000,B01111000,
|
||||
B00011101,B11000000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B11100000,B00111000,
|
||||
B00001111,B10000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp4[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11000011,B11111000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100011,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110011,B00011110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111011,B00000111,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111011,B00000011,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111011,B00000011,B01000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111011,B00000111,B01100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110011,B00011110,B01100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100011,B11111100,B01100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11000011,B11111000,B01100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00001101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000110,B11110000,
|
||||
B00011100,B00011100,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00001110,B00111000,
|
||||
B00011100,B00011000,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001110,B00001100,B00111000,
|
||||
B00111000,B00011100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B00001110,B00011100,
|
||||
B00111110,B10010000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011111,B01001000,B00011100,
|
||||
B00110111,B10111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011011,B11011100,B00001100,
|
||||
B00110001,B01111111,B10011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B10111111,B11001100,
|
||||
B00110000,B00111011,B11011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011101,B11101100,
|
||||
B00111000,B00010010,B11111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00001001,B01111100,
|
||||
B00111000,B01100000,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00110000,B00011100,
|
||||
B00011100,B00110000,B01110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B00011000,B00111000,
|
||||
B00011100,B01100000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B00110000,B00111000,
|
||||
B00001111,B01100001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10110000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11110101,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11110101,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp5[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100,B00111111,B10000111,B11111000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111110,B00111111,B11000111,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00110001,B11100110,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10110000,B01110110,B01111110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B10110000,B00110110,B11111100,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B10110000,B00110110,B00000000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10110000,B01110110,B00000000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00110001,B11100110,B00000000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111110,B00111111,B11000110,B00000000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100,B00111111,B10000110,B00000000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11110111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111011,B11110000,
|
||||
B00001111,B00111001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10011100,B11110000,
|
||||
B00011100,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00011100,B00111000,
|
||||
B00011100,B00111000,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001110,B00011100,B00111000,
|
||||
B00111000,B00110000,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B00011000,B00011100,
|
||||
B00111000,B00100000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011100,B00010000,B00011100,
|
||||
B00110111,B00111111,B11111001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011011,B10011111,B11111100,
|
||||
B00111111,B10111011,B11111001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011111,B11011101,B11111100,
|
||||
B00111111,B11111001,B11011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011111,B11111100,B11101100,
|
||||
B00111000,B00001000,B00111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00000100,B00011100,
|
||||
B00111000,B00011000,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00001100,B00011100,
|
||||
B00011100,B00111000,B01110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B00011100,B00111000,
|
||||
B00011100,B00111000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B00011100,B00111000,
|
||||
B00001111,B00111001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10011100,B11110000,
|
||||
B00001111,B11011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11101111,B11110000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp6[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100001,B11111100,B00111111,B11100111,B11111000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110001,B11111110,B00111111,B11110111,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10001111,B00110000,B00110110,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011101,B10000011,B10110011,B11110110,B01111110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111101,B10000001,B10110111,B11100110,B11111100,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111101,B10000001,B10110000,B00000110,B11100000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011101,B10000011,B10110000,B00000110,B01110000,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10001111,B00110000,B00000110,B00111000,B11010000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110001,B11111110,B00110000,B00000110,B00011100,B11011000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100001,B11111100,B00110000,B00000110,B00001110,B11011000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00001101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000110,B11110000,
|
||||
B00011100,B00001100,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000110,B00111000,
|
||||
B00011100,B00011000,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001110,B00001100,B00111000,
|
||||
B00111000,B00001100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B00000110,B00011100,
|
||||
B00111110,B10010000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011111,B01001000,B00011100,
|
||||
B00110111,B10111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011011,B11011100,B00001100,
|
||||
B00110011,B11111101,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011001,B11111110,B10001100,
|
||||
B00110000,B00111011,B11011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011101,B11101100,
|
||||
B00111000,B00010010,B11111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00001001,B01111100,
|
||||
B00111000,B01110000,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00111000,B00011100,
|
||||
B00011100,B00110000,B01110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B00011000,B00111000,
|
||||
B00011100,B01110000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B00111000,B00111000,
|
||||
B00001111,B01100001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10110000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp7[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100001,B11111100,B00111111,B11100111,B11111100,B11011000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110001,B11111110,B00111111,B11110111,B11111110,B11011100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10001111,B00110000,B00110110,B00000110,B11011110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011101,B10000011,B10110011,B11110110,B01111110,B11011111,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111101,B10000001,B10110111,B11100110,B11111100,B11011011,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111101,B10000001,B10110000,B00000110,B11100000,B11011001,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011101,B10000011,B10110000,B00000110,B01110000,B11011000,B11100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10001111,B00110000,B00000110,B00111000,B11011000,B01110000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110001,B11111110,B00110000,B00000110,B00011100,B11011000,B00111000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100001,B11111100,B00110000,B00000110,B00001110,B11011000,B00011000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000001,B11110000,
|
||||
B00011100,B00000111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000011,B10111000,
|
||||
B00011110,B00000110,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B00000011,B00111000,
|
||||
B00111111,B00001100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011111,B10000110,B00011100,
|
||||
B00111011,B10001000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011101,B11000100,B00011100,
|
||||
B00110000,B11111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B01111100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111110,B00011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011111,B00001100,
|
||||
B00111000,B00100011,B10111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00010001,B11011100,
|
||||
B00111000,B01100001,B11111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00110000,B11111100,
|
||||
B00011100,B11000000,B11110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B01100000,B01111000,
|
||||
B00011101,B11000000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B11100000,B00111000,
|
||||
B00001111,B10000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11110101,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11110101,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp8[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B10000111,B11110000,B11111111,B10011111,B11110011,B01100000,B01111000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11000111,B11111000,B11111111,B11011111,B11111011,B01110000,B01111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100110,B00111100,B11000000,B11011000,B00011011,B01111000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110110,B00001110,B11001111,B11011001,B11111011,B01111100,B01100001,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110110,B00000110,B11011111,B10011011,B11110011,B01101110,B01100001,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110110,B00000110,B11000000,B00011011,B10000011,B01100111,B01100001,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110110,B00001110,B11000000,B00011001,B11000011,B01100011,B11100001,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100110,B00111100,B11000000,B00011000,B11100011,B01100001,B11100001,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11000111,B11111000,B11000000,B00011000,B01110011,B01100000,B11100001,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B10000111,B11110000,B11000000,B00011000,B00111011,B01100000,B01100001,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00011111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B11111000,
|
||||
B00011111,B10000011,B11110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B11000001,B11111000,
|
||||
B00111001,B11000111,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B11100011,B10011100,
|
||||
B00111000,B11000110,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011100,B01100011,B00011100,
|
||||
B00110000,B00111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011100,B00001100,
|
||||
B00111000,B11000110,B00111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B01100011,B00011100,
|
||||
B00111001,B11000111,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B11100011,B10011100,
|
||||
B00011111,B10000011,B11110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001111,B11000001,B11111000,
|
||||
B00011111,B00000001,B11110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001111,B10000000,B11111000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp9[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11111110,B00011111,B11000011,B11111110,B01111111,B11001101,B10000001,B11111111,B11100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00011111,B11100011,B11111111,B01111111,B11101101,B11000001,B11111111,B11101100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10011000,B11110011,B00000011,B01100000,B01101101,B11100001,B10000110,B00001110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11011000,B00111011,B00111111,B01100111,B11101101,B11110001,B10000110,B00001110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11011000,B00011011,B01111110,B01101111,B11001101,B10111001,B10000110,B00001100,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11011000,B00011011,B00000000,B01101110,B00001101,B10011101,B10000110,B00001100,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11011000,B00111011,B00000000,B01100111,B00001101,B10001111,B10000110,B00001100,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10011000,B11110011,B00000000,B01100011,B10001101,B10000111,B10000110,B00001100,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00011111,B11100011,B00000000,B01100001,B11001101,B10000011,B10000110,B00001100,B11001000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11111110,B00011111,B11000011,B00000000,B01100000,B11101101,B10000001,B10000110,B00001100,B11001100,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000001,B11110000,
|
||||
B00011100,B00000111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000011,B10111000,
|
||||
B00011110,B00000110,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B00000011,B00111000,
|
||||
B00111111,B00001100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011111,B10000110,B00011100,
|
||||
B00111011,B10001000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011101,B11000100,B00011100,
|
||||
B00110000,B11111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B01111100,B00001100,
|
||||
B00110000,B00111000,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B00011100,B00001100,
|
||||
B00110000,B00111110,B00011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011111,B00001100,
|
||||
B00111000,B00100011,B10111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00010001,B11011100,
|
||||
B00111000,B01100001,B11111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00110000,B11111100,
|
||||
B00011100,B11000000,B11110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B01100000,B01111000,
|
||||
B00011101,B11000000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B11100000,B00111000,
|
||||
B00001111,B10000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp10[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00111111,B10000111,B11110000,B11111111,B10011111,B11110011,B01100000,B01111111,B11111001,B11001000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00111111,B11000111,B11111000,B11111111,B11011111,B11111011,B01110000,B01111111,B11111011,B11111100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11100110,B00111100,B11000000,B11011000,B00011011,B01111000,B01100001,B10000011,B11111110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B01110110,B00001110,B11001111,B11011001,B11111011,B01111100,B01100001,B10000011,B10110111,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00111111,B11110110,B00000110,B11011111,B10011011,B11110011,B01101110,B01100001,B10000011,B00110011,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00111111,B11110110,B00000110,B11000000,B00011011,B10000011,B01100111,B01100001,B10000011,B00110011,B01000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B01110110,B00001110,B11000000,B00011001,B11000011,B01100011,B11100001,B10000011,B00110011,B01100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B11100110,B00111100,B11000000,B00011000,B11100011,B01100001,B11100001,B10000011,B00110011,B01100000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00111111,B11000111,B11111000,B11000000,B00011000,B01110011,B01100000,B11100001,B10000011,B00110011,B01101000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00111111,B10000111,B11110000,B11000000,B00011000,B00111011,B01100000,B01100001,B10000011,B00110011,B01101100,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11010111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00001101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000110,B11110000,
|
||||
B00011100,B00011100,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00001110,B00111000,
|
||||
B00011100,B00011000,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001110,B00001100,B00111000,
|
||||
B00111000,B00011100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B00001110,B00011100,
|
||||
B00111110,B10010000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011111,B01001000,B00011100,
|
||||
B00110111,B10111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011011,B11011100,B00001100,
|
||||
B00110001,B01111111,B10011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011000,B10111111,B11001100,
|
||||
B00110000,B00111011,B11011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011101,B11101100,
|
||||
B00111000,B00010010,B11111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00001001,B01111100,
|
||||
B00111000,B01100000,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00110000,B00011100,
|
||||
B00011100,B00110000,B01110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B00011000,B00111000,
|
||||
B00011100,B01100000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B00110000,B00111000,
|
||||
B00001111,B01100001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10110000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11110101,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11110101,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp11[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000011,B11111000,B01111111,B00001111,B11111001,B11111111,B00110110,B00000111,B11111111,B10011100,B11100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000011,B11111100,B01111111,B10001111,B11111101,B11111111,B10110111,B00000111,B11111111,B10111111,B11110100,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00001110,B01100011,B11001100,B00001101,B10000001,B10110111,B10000110,B00011000,B00111111,B11110110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000111,B01100000,B11101100,B11111101,B10011111,B10110111,B11000110,B00011000,B00111011,B01110110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000011,B11111111,B01100000,B01101101,B11111001,B10111111,B00110110,B11100110,B00011000,B00110011,B00110110,B10000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000011,B11111111,B01100000,B01101100,B00000001,B10111000,B00110110,B01110110,B00011000,B00110011,B00110110,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000111,B01100000,B11101100,B00000001,B10011100,B00110110,B00111110,B00011000,B00110011,B00110110,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00001110,B01100011,B11001100,B00000001,B10001110,B00110110,B00011110,B00011000,B00110011,B00110110,B11000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000011,B11111100,B01111111,B10001100,B00000001,B10000111,B00110110,B00001110,B00011000,B00110011,B00110110,B11111000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000011,B11111000,B01111111,B00001100,B00000001,B10000011,B10110110,B00000110,B00011000,B00110011,B00110110,B11111100,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111101,B01111111,B11111111,B11111111,B11000000,
|
||||
B00001111,B11110111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111011,B11110000,
|
||||
B00001111,B00111001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10011100,B11110000,
|
||||
B00011100,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00011100,B00111000,
|
||||
B00011100,B00111000,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001110,B00011100,B00111000,
|
||||
B00111000,B00110000,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B00011000,B00011100,
|
||||
B00111000,B00100000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011100,B00010000,B00011100,
|
||||
B00110111,B00111111,B11111001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011011,B10011111,B11111100,
|
||||
B00111111,B10111011,B11111001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011111,B11011101,B11111100,
|
||||
B00111111,B11111001,B11011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011111,B11111100,B11101100,
|
||||
B00111000,B00001000,B00111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00000100,B00011100,
|
||||
B00111000,B00011000,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00001100,B00011100,
|
||||
B00011100,B00111000,B01110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B00011100,B00111000,
|
||||
B00011100,B00111000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B00011100,B00111000,
|
||||
B00001111,B00111001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10011100,B11110000,
|
||||
B00001111,B11011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11101111,B11110000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp12[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111100,B00111111,B10000111,B11111100,B11111111,B10011011,B00000011,B11111111,B11001110,B01110011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111110,B00111111,B11000111,B11111110,B11111111,B11011011,B10000011,B11111111,B11011111,B11111011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000111,B00110001,B11100110,B00000110,B11000000,B11011011,B11000011,B00001100,B00011111,B11111011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000011,B10110000,B01110110,B01111110,B11001111,B11011011,B11100011,B00001100,B00011101,B10111011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111111,B10110000,B00110110,B11111100,B11011111,B10011011,B01110011,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111111,B10110000,B00110110,B00000000,B11011100,B00011011,B00111011,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000011,B10110000,B01110110,B00000000,B11001110,B00011011,B00011111,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000111,B00110001,B11100110,B00000000,B11000111,B00011011,B00001111,B00001100,B00011001,B10011011,B01100000,B01100000,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111110,B00111111,B11000110,B00000000,B11000011,B10011011,B00000111,B00001100,B00011001,B10011011,B01111111,B01111111,B00000000,B00000000,
|
||||
B00000000,B00000001,B11111100,B00111111,B10000110,B00000000,B11000001,B11011011,B00000011,B00001100,B00011001,B10011011,B01111111,B01111111,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00001101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000110,B11110000,
|
||||
B00011100,B00001100,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000110,B00111000,
|
||||
B00011100,B00011000,B01110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001110,B00001100,B00111000,
|
||||
B00111000,B00001100,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B00000110,B00011100,
|
||||
B00111110,B10010000,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011111,B01001000,B00011100,
|
||||
B00110111,B10111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011011,B11011100,B00001100,
|
||||
B00110011,B11111101,B00011001,B10000000,B00011011,B11111101,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B01111000,B00011001,B11111110,B10001100,
|
||||
B00110000,B00111011,B11011001,B10000000,B00011001,B11111001,B11111111,B11000011,B00011000,B01100000,B00110000,B01100000,B00110000,B00011000,B00011101,B11101100,
|
||||
B00111000,B00010010,B11111001,B11000000,B00011000,B11100001,B11000000,B00000110,B00001100,B01100000,B00110000,B01100000,B00110000,B00011100,B00001001,B01111100,
|
||||
B00111000,B01110000,B00111000,B11110000,B00011000,B01110000,B11100000,B00001100,B00000110,B01100000,B00110000,B01100000,B00110000,B00011100,B00111000,B00011100,
|
||||
B00011100,B00110000,B01110000,B01111111,B11011000,B00111000,B01111111,B11001100,B11111110,B01111111,B10110000,B01100000,B00110000,B00001110,B00011000,B00111000,
|
||||
B00011100,B01110000,B01110000,B00111111,B11011000,B00011100,B00111111,B11011001,B11111111,B01111111,B10110000,B01100000,B00110000,B00001110,B00111000,B00111000,
|
||||
B00001111,B01100001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10110000,B11110000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00000011,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B11000000,
|
||||
B00000000,B11111111,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11111111,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp14[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00011111,B11000001,B11111100,B00011111,B11110001,B11111111,B00011011,B00000001,B11111111,B11110011,B10011110,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00011111,B11100001,B11111110,B00011111,B11111001,B11111111,B10011011,B10000001,B11111111,B11110111,B11111111,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B01110001,B10001111,B00011000,B00011001,B10000001,B10011011,B11000001,B10000110,B00000111,B11111111,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00111001,B10000011,B10011001,B11111001,B10011111,B10011011,B11100001,B10000110,B00000111,B01101111,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00011111,B11111001,B10000001,B10011011,B11110001,B10111111,B00011011,B01110001,B10000110,B00000110,B01100011,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00011111,B11111001,B10000001,B10011000,B00000001,B10111000,B00011011,B00111001,B10000110,B00000110,B01100011,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B00111001,B10000001,B10011000,B00000001,B10011100,B00011011,B00011101,B10000110,B00000110,B01100011,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B01110001,B10000011,B10011000,B00000001,B10001110,B00011011,B00001111,B10000110,B00000110,B01100011,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00000000,B01110001,B10001111,B00011000,B00000001,B10001110,B00011011,B00000111,B10000110,B00000110,B01100011,B01101100,B00000110,B00000000,B00000000,
|
||||
B00000000,B00011111,B11100001,B11111110,B00011000,B00000001,B10000111,B00011011,B00000011,B10000110,B00000110,B01100011,B01101111,B11110111,B11110000,B00000000,
|
||||
B00000000,B00011111,B11000001,B11111100,B00011000,B00000001,B10000011,B10011011,B00000001,B10000110,B00000110,B01100011,B01101111,B11110111,B11110000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B00000000,
|
||||
B00000011,B11111111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B01011111,B11111111,B11000000,
|
||||
B00001111,B11000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100011,B11110000,
|
||||
B00001111,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B11110000,
|
||||
B00011111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B11111000,
|
||||
B00011111,B10000011,B11110000,B00111111,B11011111,B11111000,B00111111,B11000000,B01000000,B01100000,B00110111,B11111111,B00000011,B10001111,B11000001,B11111000,
|
||||
B00111001,B11000111,B00111000,B01111111,B11011111,B11111100,B01111111,B11000000,B11100000,B01100000,B00110111,B11111111,B10000111,B00011100,B11100011,B10011100,
|
||||
B00111000,B11000110,B00111000,B11110000,B00011000,B00001100,B11100000,B00000000,B11100000,B01100000,B00110000,B01100001,B11001110,B00011100,B01100011,B00011100,
|
||||
B00110000,B00111000,B00011001,B11000000,B00011000,B00001101,B11000000,B00000001,B10110000,B01100000,B00110000,B01100000,B11111100,B00011000,B00011100,B00001100
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp15[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000111,B11111000,B00111111,B11100001,B11111111,B11000111,B11111111,B00110011,B00000001,B11111111,B11111100,B11110011,B11001110,B11000000,B00110000,B00000000,
|
||||
B00000111,B11111100,B00111111,B11110001,B11111111,B11110111,B11111111,B10110011,B10000001,B11111111,B11111101,B11111111,B11101110,B11000000,B00110000,B00000000,
|
||||
B00000000,B00001111,B00111000,B11111001,B11000000,B01110110,B00000011,B10110011,B11000001,B11000001,B10000001,B11111111,B11101110,B11000000,B00110000,B00000000,
|
||||
B00000000,B00001111,B00111000,B11111001,B11000000,B01110110,B00000011,B10110011,B11100001,B11000001,B10000001,B11111111,B11101110,B11000000,B00110000,B00000000,
|
||||
B00000000,B00000111,B10111000,B00011101,B11001111,B11110110,B01111111,B10110011,B11110001,B11000001,B10000001,B11101100,B11101110,B11000000,B00110000,B00000000,
|
||||
B00000111,B11111111,B10111000,B00001101,B11011111,B11000110,B11111111,B00110011,B01111001,B11000001,B10000001,B11001100,B01101110,B11000000,B00110000,B00000000,
|
||||
B00000111,B11111111,B10111000,B00001101,B11000000,B00000110,B11110000,B00110011,B00011101,B11000001,B10000001,B11001100,B01101110,B11000000,B00110000,B00000000,
|
||||
B00000000,B00000111,B10111000,B00011101,B11000000,B00000110,B00111000,B00110011,B00001111,B11000001,B10000001,B11001100,B01101110,B11000000,B00110000,B00000000,
|
||||
B00000000,B00001111,B00111000,B11111001,B11000000,B00000110,B00011100,B00110011,B00000111,B11000001,B10000001,B11001100,B01101110,B11000000,B00110000,B00000000,
|
||||
B00000000,B00001111,B00111000,B11111001,B11000000,B00000110,B00011100,B00110011,B00000111,B11000001,B10000001,B11001100,B01101110,B11000000,B00110000,B00000000,
|
||||
B00000111,B11111100,B00111111,B11110001,B11000000,B00000110,B00001111,B00110011,B00000011,B11000001,B10000001,B11001100,B01101110,B11111111,B10111111,B11000000,
|
||||
B00000111,B11111000,B00111111,B11100001,B11000000,B00000110,B00000111,B10110011,B00000001,B11000001,B10000001,B11001100,B01101110,B11111111,B10111111,B11000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
const unsigned char custom_start_bmp16[] PROGMEM = {
|
||||
B01111111,B11100001,B11111111,B10000111,B11111111,B00011111,B11111100,B01110011,B10000001,B11111111,B11111110,B00111110,B00111110,B00111001,B11000000,B11100000,
|
||||
B01111111,B11110001,B11111111,B11000111,B11111111,B10011111,B11111110,B01110011,B10000001,B11111111,B11111110,B01111111,B11111111,B00111001,B11000000,B11100000,
|
||||
B00000000,B11111001,B11000011,B11100111,B11111111,B10011111,B11111110,B01110011,B11000001,B11111111,B11111110,B01111111,B11111111,B00111001,B11000000,B11100000,
|
||||
B00000000,B01111001,B11000001,B11100111,B00000001,B10011100,B00000110,B01110011,B11100001,B11000001,B11000000,B01111111,B11111111,B00111001,B11000000,B11100000,
|
||||
B00000000,B01111001,B11000000,B11100111,B00000001,B10011100,B00000110,B01110011,B11110001,B11000001,B11000000,B01111001,B11001111,B00111001,B11000000,B11100000,
|
||||
B01111111,B11111001,B11000000,B11100111,B00111111,B10011100,B11111110,B01110011,B11111001,B11000001,B11000000,B01110001,B11000111,B00111001,B11000000,B11100000,
|
||||
B01111111,B11111001,B11000000,B11100111,B01111111,B10011101,B11111110,B01110011,B10111101,B11000001,B11000000,B01110001,B11000111,B00111001,B11000000,B11100000,
|
||||
B01111111,B11111001,B11000000,B11100111,B01111111,B00011101,B11111100,B01110011,B10011111,B11000001,B11000000,B01110001,B11000111,B00111001,B11000000,B11100000,
|
||||
B00000000,B01111001,B11000000,B11100111,B00000000,B00011100,B11110000,B01110011,B10001111,B11000001,B11000000,B01110001,B11000111,B00111001,B11000000,B11100000,
|
||||
B00000000,B01111001,B11000001,B11100111,B00000000,B00011100,B01111000,B01110011,B10000111,B11000001,B11000000,B01110001,B11000111,B00111001,B11000000,B11100000,
|
||||
B00000000,B11111001,B11000011,B11100111,B00000000,B00011100,B00111100,B01110011,B10000011,B11000001,B11000000,B01110001,B11000111,B00111001,B11111100,B11111110,
|
||||
B01111111,B11110001,B11111111,B11000111,B00000000,B00011100,B00011110,B01110011,B10000001,B11000001,B11000000,B01110001,B11000111,B00111001,B11111100,B11111110,
|
||||
B01111111,B11100001,B11111111,B10000111,B00000000,B00011100,B00001110,B01110011,B10000001,B11000001,B11000000,B01110001,B11000111,B00111001,B11111100,B11111110,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIME_PER_FRAME
|
||||
|
||||
static const boot_frame_t boot_frame_0 PROGMEM = { custom_start_bmp1, 200 };
|
||||
static const boot_frame_t boot_frame_1 PROGMEM = { custom_start_bmp2, 150 };
|
||||
static const boot_frame_t boot_frame_2 PROGMEM = { custom_start_bmp3, 150 };
|
||||
static const boot_frame_t boot_frame_3 PROGMEM = { custom_start_bmp4, 150 };
|
||||
static const boot_frame_t boot_frame_4 PROGMEM = { custom_start_bmp5, 150 };
|
||||
static const boot_frame_t boot_frame_5 PROGMEM = { custom_start_bmp6, 150 };
|
||||
static const boot_frame_t boot_frame_6 PROGMEM = { custom_start_bmp7, 150 };
|
||||
static const boot_frame_t boot_frame_7 PROGMEM = { custom_start_bmp8, 150 };
|
||||
static const boot_frame_t boot_frame_8 PROGMEM = { custom_start_bmp9, 150 };
|
||||
static const boot_frame_t boot_frame_9 PROGMEM = { custom_start_bmp10, 150 };
|
||||
static const boot_frame_t boot_frame_10 PROGMEM = { custom_start_bmp11, 150 };
|
||||
static const boot_frame_t boot_frame_11 PROGMEM = { custom_start_bmp12, 150 };
|
||||
static const boot_frame_t boot_frame_12 PROGMEM = { custom_start_bmp, 1000 };
|
||||
static const boot_frame_t boot_frame_13 PROGMEM = { custom_start_bmp14, 150 };
|
||||
static const boot_frame_t boot_frame_14 PROGMEM = { custom_start_bmp15, 150 };
|
||||
static const boot_frame_t boot_frame_15 PROGMEM = { custom_start_bmp16, 1000 };
|
||||
|
||||
static const boot_frame_t * const custom_bootscreen_animation[] PROGMEM = {
|
||||
&boot_frame_0, &boot_frame_1, &boot_frame_2, &boot_frame_3, &boot_frame_4,
|
||||
&boot_frame_5, &boot_frame_6, &boot_frame_7, &boot_frame_8, &boot_frame_9,
|
||||
&boot_frame_10, &boot_frame_11, &boot_frame_12, &boot_frame_13, &boot_frame_14, &boot_frame_15
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,53 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Made with Marlin Bitmap Converter
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*
|
||||
* This bitmap from 56x19 C/C++ data
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define STATUS_SCREEN_X 64
|
||||
#define STATUS_LOGO_WIDTH 48
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00111001,B11000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B01000101,B00100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000101,B00010000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000101,B00010000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00011001,B00010000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000101,B00010000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000101,B00010000,B00000000,B00000000,
|
||||
B00000000,B00000000,B01000101,B00100000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00111001,B11000000,B00000000,B00000000,
|
||||
B00111100,B00000000,B00000000,B00011000,B11001001,B10011000,
|
||||
B00100010,B00000010,B00000000,B10011000,B11000000,B10001000,
|
||||
B00100010,B00000000,B00000000,B10011000,B11000000,B10001000,
|
||||
B00100010,B10110110,B01011001,B11010101,B01011000,B10001000,
|
||||
B00111100,B11000010,B01100100,B10010101,B01001000,B10001000,
|
||||
B00100000,B10000010,B01000100,B10010101,B01001000,B10001000,
|
||||
B00100000,B10000010,B01000100,B10010010,B01001000,B10001000,
|
||||
B00100000,B10000010,B01000100,B10010010,B01001000,B10001000,
|
||||
B00100000,B10000111,B01000100,B01010010,B01011101,B11011100
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,3 @@
|
||||
# Ender-2 Pro
|
||||
|
||||
The Creality3D Ender-2 Pro was released in December 2021 sporting a 32-bit Creality Silent board labeled as version 4.2.3. This board is a bit mysterious as it is completely absent from Creality's documentation. It differs only slightly from board version 4.2.2 with the Bed Heater pin exchanged with one of the Encoder pins.
|
||||
@@ -0,0 +1,97 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
|
||||
#define CUSTOM_BOOTSCREEN_INVERTED
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
|
||||
B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
|
||||
B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
|
||||
B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
|
||||
B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
|
||||
B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
|
||||
B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
|
||||
B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
|
||||
B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
|
||||
B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
|
||||
B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
|
||||
};
|
||||
@@ -0,0 +1,71 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 39
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11111000,B00000001,B10000000,B00000000,B00011000,
|
||||
B01001000,B00000000,B10000000,B00000000,B00100100,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000100,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001000,
|
||||
B01000001,B00100100,B10011110,B01000000,B00010000,
|
||||
B01001001,B00100100,B10010000,B01000000,B00100000,
|
||||
B11111011,B10110011,B11001110,B11100000,B00111100,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000011,B10000000,B00000000,B00000000,
|
||||
B00000000,B00000010,B01000000,B00000000,B00000000,
|
||||
B00000000,B00000010,B01010110,B01100000,B00000000,
|
||||
B00000000,B00000011,B10011000,B10010000,B00000000,
|
||||
B00000000,B00000010,B00010000,B10010000,B00000000,
|
||||
B00000000,B00000010,B00010000,B10010000,B00000000,
|
||||
B00000000,B00000010,B00010000,B01100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,33 @@
|
||||
# Creality Ender Support
|
||||
|
||||
This configuration is based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
|
||||
|
||||
* 1.0.0 had very different serial output in `setup()` and overall code structure.
|
||||
* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
|
||||
|
||||
Configurations were found by seeing what code was compiled into the firmware, and constants used there.
|
||||
|
||||
For U8Glib, at least version 1.14 and at most 1.17 is used, because
|
||||
|
||||
* 1.12 didn't have the extra speed argument to u8g_InitCom.
|
||||
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
|
||||
* 1.18 has a new directory structure.
|
||||
|
||||
## Bitmaps
|
||||
|
||||
The bootscreen and custom status screens come from Creality's firmware.
|
||||
|
||||
## Creality Ender-2 firmware status
|
||||
|
||||
The firmware source code has been published on 2018/07/10.
|
||||
It is based on Marlin 1.1. The source code and .hex binaries for all printers (including Ender-2) can be obtained from:
|
||||
https://www.creality3d.cn/download/firmware_c0001
|
||||
|
||||
And repositories for CR-10S and Ender-3 can be found here:
|
||||
https://github.com/Creality3DPrinting
|
||||
|
||||
The configuration files have been verified to match the original configuration, but further investigation is needed to ensure there aren't any extra changes in the source code.
|
||||
|
||||
## Ender-2 specific changelog:
|
||||
|
||||
* 2018/10/08 - Updated BED_MAXTEMP to 75 to match the original Creality Ender-2 Firmware (which is now open source)
|
||||
@@ -0,0 +1,97 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
|
||||
#define CUSTOM_BOOTSCREEN_INVERTED
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
|
||||
B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
|
||||
B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
|
||||
B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
|
||||
B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
|
||||
B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
|
||||
B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
|
||||
B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
|
||||
B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
|
||||
B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
|
||||
B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
|
||||
};
|
||||
@@ -0,0 +1,66 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 39
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000110,B00000000,B00000000,
|
||||
B11111110,B00000000,B00000010,B00000000,B00000000,
|
||||
B01000010,B00000000,B00000010,B00000000,B00000000,
|
||||
B01001000,B00000000,B00000010,B00000000,B00000000,
|
||||
B01001000,B11011100,B00111110,B00111100,B11101110,
|
||||
B01111000,B01100010,B01000010,B01000010,B00110010,
|
||||
B01001000,B01000010,B01000010,B01000010,B00100000,
|
||||
B01001000,B01000010,B01000010,B01111110,B00100000,
|
||||
B01000000,B01000010,B01000010,B01000000,B00100000,
|
||||
B01000010,B01000010,B01000110,B01000010,B00100000,
|
||||
B11111110,B11100111,B00111011,B00111100,B11111000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,97 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
|
||||
#define CUSTOM_BOOTSCREEN_INVERTED
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
|
||||
B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
|
||||
B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
|
||||
B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
|
||||
B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
|
||||
B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
|
||||
B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
|
||||
B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
|
||||
B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
|
||||
B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
|
||||
B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
|
||||
};
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user